{"product_id":"analogue-oscilloscope-os-5020","title":"Oscilloscope OS5020","description":"\u003cp\u003eBenchtop oscilloscope for teaching labs.\u003c\/p\u003e\u003ch3\u003eFeatures\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHigh luminance,internal graticule CRT\u003c\/li\u003e\n\u003cli\u003eJapanese electronic encoder,light,handy and reliable\u003c\/li\u003e\n\u003cli\u003eFully sealed long live vertical mode switch\u003c\/li\u003e\n\u003cli\u003eALT Triggering Function. Two indepen dent signals simultaneous observation\u003c\/li\u003e\n\u003cli\u003eBuild-in 6 Digit Frequency Counter\u003c\/li\u003e\n\u003cli\u003e20MHz Dual Channel\u003c\/li\u003e\n\u003cli\u003e10 times sweep magnification\u003c\/li\u003e\n\u003cli\u003eTV Synchronization,X-Y mode\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\u003cp\u003eHorizontal System\u003cbr\u003eSweep time: 0.2uSec~0.5Sec\/DIV,20steps in 1-2-5 sequence;\u003cbr\u003eSweep time accuracy:±3%\u003cbr\u003eVernier sweep time control:≤1\/2.5 of panel-indicated ＆#118alue;\u003cbr\u003eSweep magnification: 10 times;\u003cbr\u003e×10MAG sweep time accuracy: ±5% (20nSec~50nSec are uncalibrated);\u003cbr\u003eLinearity:±5%,×10MAG: ±10% (0.2s~1us)\u003cbr\u003ePosition shift caused by ×10MAG: within 2DIV. At CRT screen center\u003cbr\u003eX-Y MODE:\u003cbr\u003eFrequency bandwidth: DC to at least 500KHz;\u003cbr\u003eX-Y phase difference:≤3°at DC~50KHz\u003cbr\u003eSensitivity: Same as vertical axis. (X-axis:CH1 input signal; Y-axis:CH2 input signal.);\u003cbr\u003eCALIBRATION VOLTAGE\u003cbr\u003eWaveform: Positive-going square wave;\u003cbr\u003eFrequency: Approx. 1KHz;\u003cbr\u003eDuty ratio: Within 48:52;\u003cbr\u003eOutput voltage: 2Vp-p±2%;\u003cbr\u003eOutput impedance: Approx.1KΩ\u003cbr\u003eCALIBRATION SIGNAl\u003cbr\u003eWaveform: Positive-going square wave;\u003cbr\u003eFrequency: Approx. 1KHz;\u003cbr\u003eDuty ratio: Within 48:52;\u003cbr\u003eOutput voltage: 2Vp-p±2%;\u003cbr\u003eOutput impedance: Approx.1KΩ\u003cbr\u003eCRT\u003cbr\u003eType: 6-inch rectangular type, internal graticule;\u003cbr\u003ePhosphor:P31;\u003cbr\u003eAcceleration voltage: Approx.2KV(20MHz)\/Approx.12kv(40MHz);\u003cbr\u003eEffective screen size:8×10DIV[1DIV=10mm(0.39in)];\u003cbr\u003eGraticule: Internal;\u003cbr\u003eTrace rotation: Provided\u003cbr\u003eVERTICAL AXIS\u003cbr\u003eSensitivity:5mV~5V\/DIV,10 steps in 1-2-5sequence\u003cbr\u003eSensitivity accuracy:≤3%\u003cbr\u003eVernier vertical sensitivity: Continuously variable to 1\/2.5 or less of panel-indicated ＆#118alue Frequency\u003cbr\u003ebandwidth:\u003cbr\u003eDC~20MHz(x5MAG:DC~7MHz)\/DC~40MHz(x5MAG:DC~15MHz)DC~50MHz(X5MAG:DC~15MHz)\u003cbr\u003eAC coupling: Low limit frequency 10Hz. (With reference to 100KHz, 8DIV, Frequency response with-3dB.)\u003cbr\u003eRise time: Approx.17.5ns (x5 MAG: Approx.50nS) Approx.8.75ns (x5 MAG: Approx.25nS)\u003cbr\u003eApprox.7ns (x5 MAG: Approx.23.3nS)\u003cbr\u003eInput impedance: Approx.1MΩ\/Approx.25pF\u003cbr\u003eDC balance shift: 5mV~5V\/DIV: ±0.5DIV, 1mV~2mV\/DIV ±2.0DIV\u003cbr\u003eLinearity:\u0026lt;±0.1DIV of amplitude change when waveform of 2DIV at graticule center is moved vertically vertical modes: CH1 single channel; CH2 single channel; DUAL: CH1 and CH2 are displayed Simultaneously. ALT or CHOP selectable at any sweep at any sweep rate; ADD: CH1+CH2 algebraic addition Chopping repetition frequency: Approx. 250KHz Input coupling: AC, GND, DC Maximum input voltage: 300Vpeak (AC: frequency 1KHz or lower); common mode rejection ratio: 50:1 or better at 50KHz sinusoidal wave. (When sensitivities of Ch1 and Ch2 are set equally) Isolation between channels (At 5mV\/DIV range): \u0026gt;1000:1 at 50KHz; \u0026gt;30:1 at 15MHz\/\u0026gt;30:1 at 35MHz\/\u0026gt;30:1 at 45MHz\u003cbr\u003eCH2 INV BAL: Balanced point variation:≤1DIV (Reference at center graticule)\u003cbr\u003eTRIGGERING\u003cbr\u003eTriggering source: CH1,CH2,LINE,EXT\u003cbr\u003eCoupling: AC: 20Hz to full bandwidth\u003cbr\u003eSLOPE:+\/-\u003cbr\u003eSensitivity: 20Hz~2MHz:1DIV, TRIG-ALT:2DIV EXT:200mV；TRIG-ALT:3DIV,EXT:800mV;\u003cbr\u003e2~20MHz:1.5DIV；20MHz~40MHz:2.5DIV；40MHz~50MHz:3DIV；\u003cbr\u003eTV: Sync pulse more than 1 DIV (EXT:1V)\u003cbr\u003eTriggering modes: AUTO; NORM: TV-V: TV-H: (Both TV-V and TV-H synchronize only\u003cbr\u003ewhen the synchronizing signal is negative)\u003cbr\u003eEXT triggering signal input: Input impedance\/: Approx:1MΩ\/approx.25pF;\u003cbr\u003eMax.input voltage:300V (DC+AC peak), AC: Frequency not higher than 1KHz\u003c\/p\u003e\u003ch3\u003eOverview\u003c\/h3\u003e\u003cp\u003eAn oscilloscope is a instrument commonly used to display and analyze the waveform of electronic signals.\u003c\/p\u003e\u003ch3\u003eDownloads\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1058\/7003\/3239\/files\/OSCILLOSCOPE-OS5020.pdf?v=1792744569\" target=\"_blank\" rel=\"noopener\"\u003eCatalog (PDF)\u003c\/a\u003e\u003c\/li\u003e\u003c\/ul\u003e","brand":"Mextech","offers":[{"title":"Default Title","offer_id":52809503899864,"sku":"OS5020","price":35789.0,"currency_code":"INR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0848\/6653\/1544\/files\/OS-5020.jpg?v=1793814138","url":"https:\/\/mextechin.com\/products\/analogue-oscilloscope-os-5020","provider":"Mextech Technologies India Private Limited","version":"1.0","type":"link"}