What is a clamp meter? It is an electrical testing tool that integrates a digital multimeter and a current sensor.

With the help of clamps, you measure the current. The probes of this instrument can measure voltage.

When a hinged jaw is attached to an electrical meter, it helps in clamping the tool securely around the wires, conductors, or cables.

Thus, you need not disconnect or de-energize the circuit.

The hard jaws under plastic moldings are made of ferrite iron and they are precisely engineered to detect, concentrate, and measure the magnetic field generated by electrical current when it goes through conductors.

It is important to buy the best-quality meter to ensure accuracy and efficiency. There are several manufacturers of Clamp Meter in India. You need to check and compare the good points before making a buying decision.

To get the best results, it is important that you perform regular calibration and proper storage of the clamp meter.

Thus, you can use it for a long time.

Also, to make the optimal use of that, you need to get familiar with its features.

Advantages of using a Clamp Meter

• They are flexible and offer ease of measurement of current on live circuits.
• They combine the features of multimeters.
• You do not come into contact with live terminals.
• Issues related to installations can be found quickly.
• They are convenient to use.
• They are cost-effective.

Features of Clamp Meters

The meter has almost all of the basic functions of a digital multimeter (DMM), such as voltage, continuity, and resistance measurements.

You can find these features in clamp meters:

• Current-sensing jaw.
• To protect your fingers from getting electrical shock, there is a Tactile barrier.
• The Hold button freezes the display reading. When you press the button again, the reading is released.
• Dial or rotary switch.
• Display screen.
• Backlight button so that you can see the reading in low light conditions.
• Min Max button shows the maximum, minimum, and average inputs in current, voltage, and frequency modes.
• Inrush current button.
• The Zero button removes DC offset from DC current measurements. Also, it acts as the shift button for choosing yellow functions.
• The Lever to release jaw.
• Alignment marks.
• Volts/ohm and common input jack.
• Input for flexible current probe.

To buy the most suitable from Clamp Meter Manufacturers in Gujarat, you need to have clarity about your needs. Check product specifications and pick the best clamp meter.

Also read : What Is a Whiteness Meter and How Does It Work?